Tuesday, December 30, 2014
Monday, December 29, 2014
Closing out the holiday reminder!!
Please remember to take down your holiday decorations no later than the 15th of January.
If you have any questions please feel free to call the office at 919-489-7599.
Monday, December 22, 2014
Christmas tree Disposal
If you dispose of a tree please take them to the large blue dumpster near building number 6.
Do not leave trees by the trash dumpsters.
If anything is blocking the dumpsters it will not be emptied.
Have a happy holiday!!
Thursday, December 18, 2014
New rule for gym access
January 2, 2015 all gym access cards will be disabled. Please stop by the office to have your card
re-activated. Remember the fitness center is for residents only.
Effective January 1, 2015 NO GUESTS will be able to use the fitness center. Residents only
-no exceptions. All residents under 16 must be with a parent or legal guardian who is a lease holder to use the fitness center.
Effective January 1, 2015 access cards will be $25.00. Replacement cards will be $50.00. All fees are non
-refundable.
Saturday, December 13, 2014
Some information on why we change our air filter. Dont forget to change yours!!
Indoor air quality (IAQ) is vital to the health of a building and its occupants, and it can impact productivity and the bottom line. Poor IAQ can lead to irritation, allergies, asthma, reproductive and developmental problems, and cancer.
Following a few rules can help maintenance and engineering managers maintain healthy indoor environments in commercial and institutional buildings. Proper HVAC system maintenance and reducing the amount of indoor air contaminants through source control are the most basic steps to ensure healthy buildings and the well-being of occupants and visitors.
Because of the impact HVAC systems can have on a building’s indoor environment, it is important for technicians to adhere to proper maintenance practices. Technicians can perform a handful of procedures to keep systems working properly and free from contaminants that might negatively impact a building’s IAQ.
These procedures include: changing filters; cleaning coils; flushing the condensate system; lubricating moving parts; replacing components designed to wear out at appropriate intervals — sealed bearings and drive belts; and inspecting for signs of damage or premature equipment failure.
Failure to perform these maintenance practices can lead to mechanical failures or fouling of the equipment. Examples of failures include: stuck dampers; blocked evaporator or condenser coils; malfunctioning control components; clogged condensate drains; ineffective pipe insulation; and disconnected ducts or blocked strainers. Lack of proper maintenance also can lead to reduced cooling capacity and airflow, which might result in poor ventilation and thermal-comfort issues.
Good testing, adjusting, and balancing procedures are important tools in combating equipment failures or poor operation. Implementing these procedures when new construction and renovation projects are completed can help verify equipment operation, establish adequate air and water flows, and determine the general adherence of the mechanical systems to the intended performance.
Technicians can perform testing, adjusting and balancing procedures on existing systems as well to verify current operation meets the original design intent. Improper testing, adjusting, and balancing procedures can leave managers with poor or incomplete information and can cause technicians to overlook problems, such as inactive controls, duct leaks, missing air devices, or malfunctioning equipment.
Replacing filters at appropriate intervals also is important for healthy IAQ. Excessive dust loading on aging filters can lead to reduced airflow, and extreme loading can cause a filter to collapse and release captured dust. Replacing filters too often also can prevent filters from reaching their design efficiencies. As a filter loads, the efficiency will increase as particulate matter is captured more quickly.
Following a few rules can help maintenance and engineering managers maintain healthy indoor environments in commercial and institutional buildings. Proper HVAC system maintenance and reducing the amount of indoor air contaminants through source control are the most basic steps to ensure healthy buildings and the well-being of occupants and visitors.
IAQ Maintenance Strategies
HVAC systems play a significant role in promoting IAQ and are the primary method for providing thermal comfort, removing or diluting the byproducts of occupancy, and providing proper building pressurization. These systems also are the primary transport mechanisms for indoor contaminants and might become a source of IAQ complaints if neglected.Because of the impact HVAC systems can have on a building’s indoor environment, it is important for technicians to adhere to proper maintenance practices. Technicians can perform a handful of procedures to keep systems working properly and free from contaminants that might negatively impact a building’s IAQ.
These procedures include: changing filters; cleaning coils; flushing the condensate system; lubricating moving parts; replacing components designed to wear out at appropriate intervals — sealed bearings and drive belts; and inspecting for signs of damage or premature equipment failure.
Failure to perform these maintenance practices can lead to mechanical failures or fouling of the equipment. Examples of failures include: stuck dampers; blocked evaporator or condenser coils; malfunctioning control components; clogged condensate drains; ineffective pipe insulation; and disconnected ducts or blocked strainers. Lack of proper maintenance also can lead to reduced cooling capacity and airflow, which might result in poor ventilation and thermal-comfort issues.
Good testing, adjusting, and balancing procedures are important tools in combating equipment failures or poor operation. Implementing these procedures when new construction and renovation projects are completed can help verify equipment operation, establish adequate air and water flows, and determine the general adherence of the mechanical systems to the intended performance.
Technicians can perform testing, adjusting and balancing procedures on existing systems as well to verify current operation meets the original design intent. Improper testing, adjusting, and balancing procedures can leave managers with poor or incomplete information and can cause technicians to overlook problems, such as inactive controls, duct leaks, missing air devices, or malfunctioning equipment.
Replacing filters at appropriate intervals also is important for healthy IAQ. Excessive dust loading on aging filters can lead to reduced airflow, and extreme loading can cause a filter to collapse and release captured dust. Replacing filters too often also can prevent filters from reaching their design efficiencies. As a filter loads, the efficiency will increase as particulate matter is captured more quickly.
Tips on saftey for the holiday's
Fresh tree:
- Be sure the needles are not falling off, that it is a fresh tree. When you bring it home
be sure to trim two inches off the bottom of the tree and keep it full of water.
- Check the water every day to keep it from drying out.
- When the holidays
are over take the tree out as soon as possible
Artificial tree:
- Tested UL approved tree.
- Check your lights, never have more than 3 strands put together. Make sure the connections
and bulbs are not loose, plug is not falling apart, the insulation is not cracking on it.
Outside:
- Always use the plastic clips to hang your lights up, not nails. You always have a chance of clipping the wire .
- Again, never more than 3 strands together, also be sure they are outside lights, not indoor lights. Make sure to use the right extension cord for plugging them in.
- Unplug tree lights before going to bed or leaving home.
- Be sure the needles are not falling off, that it is a fresh tree. When you bring it home
- Check the water every day to keep it from drying out.
- When the holidays
Artificial tree:
- Tested UL approved tree.
- Check your lights, never have more than 3 strands put together. Make sure the connections
Outside:
- Always use the plastic clips to hang your lights up, not nails. You always have a chance of clipping the wire .
- Again, never more than 3 strands together, also be sure they are outside lights, not indoor lights. Make sure to use the right extension cord for plugging them in.
- Unplug tree lights before going to bed or leaving home.
Tuesday, December 9, 2014
Closing early tommorow
Subscribe to:
Posts (Atom)